Machine Orientation When Setting Function Speeds - JLG 660SJ Service And Maintenance Manual

Configuration Digit
CLEARSKY:
25
CRIBBING OPTION:
26
FUEL TANK SIZE:
27
ALARM/HORN:
28
6.3 MACHINE ORIENTATION WHEN SETTING
FUNCTION SPEEDS
LIFT UP: from platform control, lowest elevation up to maxi-
mum elevation, boom retracted, jib retracted.
LIFT DOWN: from platform control, maximum elevation down
to minimum elevation, boom retracted, jib retracted.
JIB LIFT UP: from platform control, lowest jib elevation up to
maximum jib elevation, boom retracted, jib retracted.
JIB LIFT DOWN: from platform control, maximum jib elevation
down to minimum jib elevation, boom retracted, jib retracted.
SWING RIGHT(Max): 360°, from platform control, boom
approximately 45° elevation, boom retracted, jib retracted.
SWING LEFT(Max): 360°, from platform control, boom
approximately 45° elevation, boom retracted, jib retracted.
TELESCOPE OUT: from platform control, boom 20°, 500 lb
(226 kg) capacity selected.
TELESCOPE IN: from platform control, boom 20°, 500 lb (226
kg) capacity selected.
JIB TELESCOPE IN: from platform control, boom horizontal, jib
horizontal, 500 lb (226 kg) capacity selected.
JIB TELESCOPE OUT: from platform control, boom horizontal,
jib horizontal, 500 lb (226 kg) capacity selected.
3121298
Table 6-5. Machine Configuration Programming Information
Number
0 NO: ClearSky Telematics system not installed.
1 YES: ClearSky Telematics system installed.
0 NO: Cribbing Option is disabled.
1 YES: Cribbing Option is enabled.
0 31 Gallon tank.
1 52 Gallon tank.
0 SEPERATE: Separate alarm and horn.
1 COMBINED: combination alarm/horn.
SECTION 6 - JLG CONTROL SYSTEM
Description
DRIVE FORWARD (Max): high speed - low torque setting,
drive 200 ft (61 m) front wheels to front wheels. Timed after
machine has obtained maximum speed.
DRIVE REVERSE (Max): high speed - low torque setting, drive
200 ft (61 m) front wheels to front wheels Timed after machine
has obtained maximum speed.
DRIVE FORWARD (Creep Max): high torque - low speed set-
ting, platform speed knob at full creep
DRIVE REVERSE (Creep Max): high torque - low speed set-
ting, platform speed knob at full creep
DRIVE FORWARD (Elevated Max - Boom Beyond Trans-
port): high speed - low torque setting, platform speed knob
out of creep, Lift boom above transport, drive forward 50 ft (15
m).
DRIVE REVERSE (Elevated Max - Boom Beyond Transport):
high speed - low torque setting, platform speed knob out of
creep, Lift boom above transport, drive backward 50 ft (15 m).
– JLG Lift –
Default
Number
0
0
0
0
4150364 F
6-37