Section 4: Parts and Module Replacement
4.3
Replacement Procedures
4.3.1 Tools Required
• #1, #2 Phillips® magnetic-tip screwdrivers (long handle)
• Hex keys: 5 mm
• Nut driver: 5 mm
• Hex driver: 2.5 mm, 3 mm, 4 mm, 5 mm (medium length handle)
• Small-slotted screwdriver (medium length handle)
• Ratchet
• Sockets: 5/32-inch, 1/4-inch
• ESD Protective Strap
• Side Cutters
4.3.2 Servicing Guidelines
• Always power down and disconnect/disengage all power sources to the projector before servicing or
cleaning.
• Follow all service safety guidelines.
• When re-installing a module, follow the removal instructions in reverse unless otherwise indicated.
• See
Section 6 Interconnections
4-2
when re-connecting harnesses.
Entero RPMSP/RPMWU/RPMHD-LED01 Service Manual
020-100368-05 Rev. 1 (06-2012)