General Precautions; Ac /Power Precautions - Christie Entero RPMWU-LED01 Service Manual

2.2.2 General Precautions

Make sure the projector is disconnected from AC power before you start repairing, removing, or installing any
modules. This projector is internationally approved and is designed for safe and reliable operation. To assure
complete safety at all times it is imperative the following precautions be taken during servicing and the original
projector design remain intact.

2.2.3 AC /Power Precautions

NOTICE: This projector must be operated in an environment that meets the operating range specification, as
listed in Section 5
Entero RPMSP/RPMWU/RPMHD-LED01 Service Manual
020-100368-05 Rev. 1 (06-2012)
Do not operate the projector with any internal part remove. If for testing
purposes you must operate the projector without the lid or the lamp door,
wear UV glasses and stand well back from the projector at all times.
Power should always be disconnected from the illumination module before
servicing, to avoid the possibility of inadvertent exposure to visible and
invisible LED radiation. Directly viewing the illumination module optical
output through optical instruments within a distance of 100 mm may pose an
eye hazard.
Always power down and disconnect/disengage all power sources to the
projector before servicing or cleaning.
Specifications.
Section 2: Service Guidelines
2-3