Installing Type V Speed Dome; Wall Mounting - HIKVISION UD06820B Quick Start Manual

9. Align the speed dome back box with the head cover. Use the wrench to tighten the
lock screws to secure the speed dome and the bracket.
10. Remove the protective film on the bubble after the installation is finished.

2.5 Installing Type V Speed Dome

Wall Mounting

Notes:
 For cement wall, you need to use the expansion screw to fix the bracket. The
mounting hole of the expansion pipe on the wall should align with the mounting
hole on the bracket.
Network Speed Dome·Quick Start Guide
Figure 2-37 Route the Cables
Lock Screw
Figure 2-38 Secure the Speed dome
22