Activation Via Web Browser; Activation Via Sadp Software - HIKVISION UD06820B Quick Start Manual

Activation via web browser, activation via SADP, and activation via client software are
supported. We will take activation via SADP software and activation via web browser as
examples to introduce the

3.2.1 Activation via Web Browser

Steps:
1. Power on the speed dome. Connect the speed dome to your computer or the
switch/router which your computer connects to.
2. Input the IP address into the address bar of the web browser, and enter the
activation interface.
Notes:
 The default IP address of the speed dome is 192.168.1.64.
 The computer and the speed dome should belong to the same subnet.
 For the speed dome enables the DHCP by default, you need to use the SADP
software to search the IP address.
3. Create a password and input the password into the password field.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a
strong password of your own choosing (Using a minimum of 8 characters,
including at least three of the following categories: upper case letters, lower
case letters, numbers, and special characters.) in order to increase the
security of your product. And we recommend you reset your password
regularly, especially in the high security system, resetting the password
monthly or weekly can better protect your product.
4. Confirm the password.
5. Click OK to activate the speed dome and enter the live view interface.

3.2.2 Activation via SADP Software

SADP software is used for detecting the online device, activating the device, and
resetting the password.
Network Speed Dome·Quick Start Guide
speed dome activation.
Figure 3-3 Activation Interface (Web)
28