Table of Contents
Advertisement
4. Apply thread tape to the thread of the head cover and rotate the head cover to the
bracket. Secure the head cover to the bracket with set screws (supplied).
5. Buckle the handle to the safety rope.
6. Hook the two ends of the safety rope to the speed dome back box and the bracket
respectively.
7. Hitch the speed dome onto the head cover with the hook on the back box.
Network Speed Dome·Quick Start Guide
Figure 2-41 Secure the Bracket
Figure 2-42 Secure the Head Cover
+
Figure 2-43 Buckle the Handle
24
Advertisement
Table of Contents
