Adding Speed Dome To Hik-Connect - HIKVISION UD06820B Quick Start Manual

5.3 Adding Speed Dome
Before you start:
You need to enable the Hik-Connect service on
Hik-Connect account. Refer to Chapter 5.1 Enable Hik-Connect Service on Speed Dome.
Steps:
1. Use a network cable to connect the
does not support Wi-Fi.
Note:
After the speed dome
operation on the
2. In the Hik-Connect app, tap "+" on the upper-right corner and then scan the QR
code of the speed dome
You can find the QR code on the
of the speed dome
Note:
If the QR code is missing or too blur to be recognized, you can also add the speed
dome by tapping the
3. Input the verification code of your speed dome.
Notes:
 The required verification code is the code you create or change when you enabling
Hik-Connect service on speed dome.
 If you forget the verification code, you can check the current verification code on
Platform Access configuration page via web browser.
4. Follow the prompts to set the network connection and add the speed dome to your
Hik-Connect account.
Network Speed Dome·Quick Start Guide
to Hik-Connect
speed dome
Figure 5-3 Connect a Router
connects to the network, wait one minute before any
speed dome using Hik-Connect app.
to add the speed
speed dome
in the package.
Figure 5-4 Scan QR Code
icon and inputting the speed dome's serial number.
36
speed dome before adding it to your
with a router if the
dome.
or on the cover of the quick start guide
speed dome