HIKVISION UD06820B Quick Start Manual page 6

 Do not drop the
high electromagnetism radiation. Avoid installation on vibrations surface or places
subject to shock (ignorance can cause device damage).
 Do not touch senor modules with fingers. If cleaning is necessary, use clean cloth with
a bit of ethanol and wipe it gently. If the
period, replace the lens cap to protect the sensor from dirt.
 Do not aim the
speed dome
may occur otherwise (which is not a malfunction), and affect the endurance of sensor
at the same time.
 The sensor may be burned out by a laser beam, so when any laser equipment is in
using, make sure that the surface of sensor will not be exposed to the laser beam.
 Do not place the
not expose it to high electromagnetic radiation.
 To avoid heat accumulation, good ventilation is required for operating environment.
 Keep the
speed dome
 While in delivery, the
the same texture.
 Improper use or replacement of the battery may result in hazard of explosion.
Replace with the same or equivalent type only. Dispose of used batteries according to
the instructions provided by the battery manufacturer.
Network Speed Dome·Quick Start Guide
speed dome or subject it to physical shock, and do not expose it to
at the sun or extra bright places. Blooming or smearing
speed dome in extremely hot, cold, dusty or damp locations, and do
away from liquid while in use.
speed dome shall be packed in its original packing, or packing of
speed dome will not be used for an extended
v