Table of Contents
Advertisement
2. Remove the cover on the back of speed dome as shown in Figure 2-27. Insert the
memory card to the memory card slot and install the cover back.
3. Refer to steps 6 in section 2.1.1 Wall Mounting to install the bracket.
4. Hook the two ends of the safety rope to the speed dome back box and the bracket
respectively. Route the cables through the bracket.
Network Speed Dome·Quick Start Guide
Protective Sticker
Figure 2-26 Remove Protective Sticker
Memory Card Slot
Figure 2-27 Memory Card Slot
17
SD CARD
Advertisement
Table of Contents
