Table of Contents
Advertisement
5. Drill a hole on the ceiling according to the drill template (supplied).
Note:
±2 mm of the circle diameter is tolerable.
6. Connect the cables.
7. Install the speed dome to the ceiling.
1). Loosen the two lock screws on both sides of the back box and make the locks in
internal position as shown in Figure 2-12.
2). Push the speed dome into the mounting hole in the ceiling.
3). Tighten the lock screws with the screwdriver and the locks will automatically
rotate outwards to secure the in-ceiling bracket to the ceiling.
8. Install the flange.
Network Speed Dome·Quick Start Guide
Figure 2-11 Drill a Hole on the Ceiling
Lock
Figure 2-12 Locks and Lock Screws
Figure 2-13 Install the Back Box
10
Ceiling
Φ 224
Unit: mm
Lock
Lock
Advertisement
Table of Contents
