Table of Contents
Advertisement
2. Remove the cover on the back of speed dome as shown in Figure 2-32. Insert the
memory card to the memory card slot and install the cover back.
3. Secure the bracket with four hex nuts and washers.
4. Apply thread tape to the thread of the head cover and rotate the head cover to the
bracket. Secure the head cover to the bracket with set screws (supplied).
Network Speed Dome·Quick Start Guide
Protective Sticker
Figure 2-31 Remove Protective Sticker
Memory Card Slot
Figure 2-32 Memory Card Slot
Figure 2-33 Secure the Bracket
20
Advertisement
Table of Contents
