Installation; Installing Type I Speed Dome; Wall Mounting - HIKVISION UD06820B Quick Start Manual

2 Installation

Before you start:
Check the package contents and make sure that the device in the package is in good
condition and all the assembly parts are included.
Notes:
 Do not touch the bubble directly by hand. The image blurs otherwise.
 Do not power the speed dome up until the installation is finished. To ensure the
safety of personnel and equipment, all the installation steps should be done with
power supply off.
 Do not drag the speed dome with its waterproof cables; otherwise the waterproof
performance is affected.

2.1 Installing Type I Speed Dome

2.1.1 Wall Mounting

Notes:
 For cement wall, you need to use the expansion screw to fix the bracket. The
mounting hole of the expansion pipe on the wall should align with the mounting
hole on the bracket.
 For wooden wall, you can just use the self-tapping screw to fix the bracket.
 Make sure that the wall is strong enough to withstand more than eight times the
weight of the speed dome and the accessories.
 The bracket in Figure 2-7 is the recommended bracket for this series of speed dome,
and a pendent adapter is required if any other bracket is selected. The dimension of
pendant adapter is G1
Network Speed Dome·Quick Start Guide
Figure 2-1 Do Not Drag the Cables
1
.
2
5