Setting Autodate Advance - Pitney Bowes DM125 Operator's Manual

Configuring Your Mailing Machine

Setting Autodate Advance

The feature is factory set to 12:00 AM. This means that at 12:00 AM, the system advances the date of the
meter stamp to the new date.
You can set the system to advance the date of the meter stamp at 12:00 PM (afternoon) instead. With
this setting, it allows you to meter mail in the afternoon for the next day's mailing if your mail is sent out in
the morning.
1. Press Options.
2. Press Page Down.
3. Select Time and Timeouts.
4. Select Autodate advance.
5. The following selections appear.
Switch AM/PM – Use the soft key next to this selection to toggle between "AM or "PM". Select
Continue.
Disable – Use the soft key next to this selection to disable the feature and return to using 12:00
AM as the time when the machine advances the date of the meter stamp.
6. The display returns to Time and Timeouts menu.
7. Press Clear (back arrow key) to return to Options menu.
Pitney Bowes Operator Guide February, 2017 Page 103 of 226