Sleep Mode Activation Time - Pitney Bowes DM125 Operator's Manual

Sleep Mode Activation Time

You can set the amount of time the machine waits until entering "sleep mode". When the machine is in
sleep mode, the display is blank and you can't process mail. You awaken the machine by merely pressing
any button on the control panel.
1. Press Options.
2. Press Page Down.
3. Select Time and Timeouts.
4. Select Sleep Mode.
5. Key in the amount of minutes (from 1-240) before the system goes into sleep mode.
6. Select OK. The display returns to Time and Timeouts menu.
7. Press Clear (back arrow key) to return to Options menu.
Pitney Bowes Operator Guide February, 2017
Configuring Your Mailing Machine
Page 102 of 226