Setting Up A Proxy Server - Pitney Bowes SendPro Mailstation Installation Requirements And Connectivity Setup Manual

IP configuration
DHCP (Dynamic IP) is the default setting for the SendPro Mailstation.
l
Static IP may be used. The following fields are available:
l
IP address
o
Subnet mask
o
Default gateway
o
Primary DNS
o
URL requirements
The following Fully Qualified Domain Names must be allowed through your network for the SendPro
Mailstation device to operate properly. If your firewall has restrictions, please allow access to these
FQDN's. We recommend these FQDN's are left open for the device to function.
If possible, please use this wildcard string:
*.sl.pb.com
l
If it is not possible to use the wildcard, please allow access to the following:
upgrades.sl.pb.com
l
imp.sl.pb.com
l
agent.sl.pb.com
l
slpb-us-east-1-imp-csd01a.boxen.sl.pb.com
l
slpb-us-east-1-imp-csd02a.boxen.sl.pb.com
l
slpb-us-east-1-imp-csd03a.boxen.sl.pb.com
l
slpb-us-east-1-imp-csd04a.boxen.sl.pb.com
l
Reverse lookups of the SendPro Mailstation IP addresses will resolve to Amazon AWS servers. Amazon
AWS is the primary DNS record for the IP address.

Setting up a proxy server

A proxy server is a computer that acts as a gateway between your local network (and your device) and a
larger-scale network (such as the internet). Proxy servers provide increased performance and security.
1. Tap the Settings icon.
2. Tap the right arrow to advance to the next page.
3. Tap Network Settings.
4. Tap Change Network Settings.
5. Tap the Wi-Fi or Wired (Ethernet) option in the in the Device & Network section.
Pitney Bowes Connectivity Guide June 2020 4