Purging The Print Heads - Pitney Bowes DM125 Operator's Manual

Purging the Print Heads

If you get a poor test print pattern, purge the printer heads to see if this fixes the problem.
1. Press Options.
2. Press Page Down twice.
3. Select Advanced Features.
4. Select Maintenance mode.
5. Select Printer maintenance.
6. Select Purge.
7. You have a choice of 4 purges to use. Normally selecting Purge A is sufficient to purge the
system, unless directed by a Pitney Bowes agent to do otherwise.
8. The system executes a purge. This may take a few moments. When finished, you return to the
Purge screen.
9. Press Clear (back arrow key) 5 times to return to the Home screen.
Pitney Bowes Operator Guide February, 2017
Maintenance
Page 52 of 226