Printing The Batch Count - Pitney Bowes DM125 Operator's Manual

Using Batch Count Feature

Printing the Batch Count

1. Press Funds.
2. Press Page Down twice and select Print Funds Report.
3. At the "Please insert envelope or tape sheet to print report" prompt, place the envelope/tape sheet
up against the back wall of the system and slide it to the right until the system grasps it. The Funds
Reports is printed and the envelope/tape strip is ejected.
4. Press Home to return to the Home screen.
Funds Report Description
Used: The total of all postage ever used in the meter.
Available: The amount of postage remaining in the meter.
Total Pieces: The total number of mail pieces run through the machine that had postage applied.
Control Sum: The total of all postage refills for the meter and equals the amount Used plus Available. This is a
postal requirement that verifies an accurate accounting of the postage in your meter.
Batch Count: The number of mail pieces that had postage applied since the last time the batch count was
cleared.
Batch Value: The amount of postage applied since the last time the batch value was cleared.
PBP Serial No: The serial number of this meter (normally meter number).
Pitney Bowes Operator Guide February, 2017 Page 47 of 226