Pitney Bowes DM125 Operator's Manual page 64

3. Pull up to remove the holder and wick from the moistener.
4. Separate wick from metal holder, clean the wick in plain water, and rinse thoroughly. Blot the wick
with a paper towel to remove excess water and place the wick back into the holder.
5. Reinstall the wick and holder assembly into moistener. Be sure the holder is seated against the top
of the wick.
6. Reinstall the moistener. Push down on the blue release lever on the moistener and guide the
moistener back onto the machine. You should hear a click as it engages.
Pitney Bowes Operator Guide February, 2017
Maintenance
Page 64 of 226