Table of Contents
Advertisement
Cleaning and care
Stubborn soiling (excluding the
FlexiClip runners)
Spilt fruit and roasting juices may
cause lasting discolouration or dull
patches on enamelled surfaces. This
discolouration is permanent but will
not affect the efficiency of the finish.
Do not use force to remove stains.
Clean only as described in this
manual.
Baked-on deposits can be removed
with a glass scraper or with a non-
abrasive stainless steel spiral pad,
warm water and liquid dish soap.
Oven cleaners will damage the
catalytic enamelled surfaces.
Remove the catalytic enamelled
panels before using an oven cleaner.
For very persistent soiling on
PerfectClean coated enamel, apply
the Miele oven spray to cold
surfaces. Follow the instructions on
the packaging.
Non-Miele oven cleaner must only be
used in a cold oven and for no longer
than a maximum of 10 minutes.
You can then also use the scouring
pad on the back of a washing-up
sponge to remove the soiling.
After cleaning, remove all oven
cleaning agent residues thoroughly
with clean water, and dry with a soft
cloth.
78
Stubborn soiling on the
FlexiClip runners
Do not wash the FlexiClip runners in
the dishwasher. This will remove the
special lubricant which is essential
for their smooth functioning.
For stubborn surface soiling or if the
bearings become sticky, proceed as
follows:
Soak the FlexiClip runners briefly
(approx. 10 minutes) in a solution of
hot water and liquid dish soap.
If necessary, you can also use the
scouring pad on the back of a
washing-up sponge. You can clean
the bearings with a soft brush.
After cleaning discolourations or
lighter areas may remain on the
runners. This will not affect the
performance in any way.
Hide quick links:
Advertisement
Table of Contents
