Table of Contents
Advertisement
Warnings and safety instructions
Technical safety
This appliance must be installed and connected in compliance
with the installation instructions.
Installation, maintenance and repair work should only be
performed by a Miele authorized service technician. Installation,
maintenance and repair work by unqualified persons can cause
considerable danger to users.
Damage to the oven can compromise your safety. Check the
appliance for visible signs of damage. Do not use a damaged oven.
Reliable and safe operation of this oven can only be guaranteed if
it has been connected to the domestic power supply.
To guarantee the electrical safety of this appliance, continuity
must exist between the appliance and an effective grounding
system. This appliance must be grounded. Connect only to properly
grounded outlet. See "Electrical connection - GROUNDING
INSTRUCTIONS". It is imperative that this basic safety requirement
be met. If there is any doubt, have the electrical system of the house
checked by a qualified electrician.
The connection data (voltage and frequency) on the data plate of
the oven must match the domestic power supply in order to avoid
the risk of damage to the oven.
Compare the data before connecting the appliance to the power
supply. Consult a qualified electrician if in any doubt.
During installation, maintenance and repair work, e.g. if the oven
lighting is faulty (see "Problem solving guide"), the oven must be
completely disconnected from the household electricity supply. It is
only completely isolated from the electricity supply when:
– the circuit breakers have been switched off, or
– the screw-type fuses have been fully unscrewed or
– the power plug (if present) is removed from the outlet. To do this,
pull the plug not the cord.
8
Hide quick links:
Advertisement
Table of Contents
