Removing The Back Panel; Lowering The Browning/Broiling Element - Miele H2265E Operating And Installation Instructions

Removing the back panel


Danger of injury!
Do not use the oven without the
back panel in place.
The back panel can be removed for
cleaning purposes.

Danger of burning!
Make sure the oven heating
elements are switched off. The oven
must be cool.
 Disconnect the appliance from the
power supply. Switch off at the wall
and withdraw the plug from the
socket, or switch off at the circuit
breaker.
 Remove the side runners.
 Undo the four screws in the corners
of the back panel and take it out.
 Clean the back panel (see "Cleaning
and Care – Cleaning catalytic
enamelled panels").
Reassemble by following these
instructions in reverse order.
 Refit the back panel carefully.
Make sure the openings are located as
illustrated in "Oven overview".
 Refit the side runners.
 Reconnect the appliance to the
power supply.
Cleaning and care
Lowering the browning/broiling
element

Danger of burning!
Make sure the oven heating
elements are switched off. The oven
must be cool.
 Remove the side runners.
 Unscrew the wing nut.
Take care not to damage the
browning/broiling element.
Do not use force when lowering the
browning/broiling element.
 Carefully lower the browning/broiling
element.
The oven ceiling can now be cleaned.
 Raise the browning/broiling element
and tighten the wing nut securely.
 Refit the side runners.
83