Table of Contents
Advertisement
Multi-socket adapters and extension leads do not guarantee the
required safety of the appliance (fire hazard). Do not use these to
connect the oven to the domestic power supply.
For safety reasons, the oven may only be used when it has been
fully installed.
Danger of electric shock! Under no circumstances open the outer
casing of the appliance.
This appliance must not be used in a non-stationary location (e.g.
on a ship).
Do not repair or replace any part of the appliance unless
specifically recommended in the operating instructions. All other
servicing should be referred to a qualified technician.
Miele can only guarantee the safety of the appliance if genuine
Miele spare parts are used. Defective components must only be
replaced by genuine Miele spare parts.
If the oven is delivered without a power connection cable, or if the
power connection cable is damaged, a special cable must be
installed by a Miele approved service technician (see "Electrical
connection").
The oven requires a sufficient supply of cool air for efficient
operation. Make sure that the supply of cool air is not hindered in
any way (e.g. by fitting heat insulation strips in the cabinet carcase).
Furthermore the required supply of cool air must not be excessively
heated by other heat sources (e.g. solid fuel stoves).
If the oven is built in behind a furniture front (e.g. a door) do not
close the door while the oven is in use. Heat and moisture can build
up behind the closed door. This can result in damage to the oven,
cabinet carcase and floor. Leave the furniture front/door open until
the oven has cooled down completely.
Warnings and safety instructions
9
Hide quick links:
Advertisement
Table of Contents
