Removing Stubborn Soiling (Excluding The Flexiclip Telescopic Runners); Stubborn Soiling On The Flexiclip Telescopic Runners - Miele H 2265-1 BP Operating And Installation Instructions

Cleaning and care
Removing stubborn soiling
(excluding the FlexiClip
telescopic runners)
Spilled fruit and roasting juices may
cause lasting discolouration or matte
patches on surfaces. This
discolouration will not affect the
functional characteristics of the
surface finish.
Do not attempt to remove these
marks. Clean them following the
instructions given here.
 Baked-on deposits can be removed
with a glass scraper or with a
stainless steel spiral pad, hot water
and washing-up liquid.
Using oven cleaners
 Very stubborn soiling on PerfectClean
surfaces can be cleaned using Miele
Oven Cleaner. This cleaner must only
be applied to cold surfaces.
If the oven spray gets into gaps and
openings, a strong odour is
generated during subsequent
cooking programmes.
Do not spray the oven cleaner onto
the roof of the oven compartment.
Do not spray the oven cleaner into
the gaps and openings of the oven
compartment walls and rear wall.
 Follow the instructions on the
packaging.
Oven cleaners from other
manufacturers must only be used in a
cold oven and must not be left on for
longer than 10 minutes.
58
 If necessary, the scouring pad on the
back of a non-scratching washing-up
sponge can be used to remove the
soiling after the soaking time.
 Remove any residual cleaning agent
thoroughly with clean water.
 Dry all surfaces with a soft cloth.
Stubborn soiling on the
FlexiClip telescopic runners
Do not clean the FlexiClip telescopic
runners in a dishwasher. The special
lubricant used in the telescopic
runners will wash out during
dishwashing.
This will impair their smooth
functioning.
For stubborn surface soiling or if the
bearings become sticky, proceed as
follows:
 Soak the FlexiClip telescopic runners
briefly (approx. 10 minutes) in a
solution of hot water and
dishwashing liquid.
If necessary, the scouring pad on the
back of a non-scratching
dishwashing sponge can be used to
remove the soiling. You can clean the
bearings with a soft brush.
The runners may appear discoloured
or a lighter colour in places after they
have been cleaned. This will not affect
the functioning of the runners in any
way.