Miele H2265E Operating And Installation Instructions page 86

Frequently Asked Questions
Problem
The FlexiClip runners do
not push in or pull out
smoothly.
The top oven lighting
does not turn on.
86
Possible cause and remedy
The bearings in the FlexiClip runners are not
sufficiently lubricated.
 Lubricate the bearings with the special Miele
lubricant.
Only the special Miele lubricant is designed for the
high temperatures in the oven cavity. Other
lubricants may resinify when heated and will gum
up the FlexiClip runners. You can obtain the
special Miele lubricant from your Miele dealer or
from Miele Service.
The halogen lamp is faulty.

Danger of burning!
Make sure the oven heating elements are switched
off. The oven must be cool.
 Disconnect the appliance from the power supply.
Switch off at the wall and withdraw the plug from
the socket, or switch off at the circuit breaker.
 Turn the lamp cover a quarter turn counter-
clockwise to release it and then pull it downwards
together with its seal to take it out.
 Replace the halogen lamp (Osram 66725 AM/A,
230 V, 25 W, G9).
 Refit the lamp cover together with its seal and turn
it clockwise to secure.
 Reconnect the appliance to the power supply.
You have selected Gentle Bake . The oven
lighting does not switch on in this function.