Download Print this page

General Description; Hardware Specifications; Electronic Specifications - Sargent EK Exit Device Retrofit Kit Installation Instructions Manual

Series p1/p2

Advertisement

General Description

2
The EK Exit Device Retrofit Kit is designed to link the SARGENT Passport 1000 Series P1/P2 product line
with non-SARGENT rim exit devices. The EK Retrofit Kit is designed specifically to link to the Von Duprin
98/99 Series rim exit device. Refer to Von Duprin Retrofit Chart (page 9) for replaceable Von Duprin exit
trim. The P1/P2 Passport locks provide access control with magnetic swipe and optional contactless
reader and/or keypad, as well as detailed audit capabilities.
For double door openings that require only a mechanical outside exit trim on one side of the opening, a
dummy trim (706-5-EK1) is available. This option ensures a consistent aesthetic across both doors.

Hardware Specifications

3
EK Exit Device Retrofit Kit for Passport 1000
Retrofits existing Von Duprin 98/99 rim exit device. Consult the Von Duprin Retrofit Chart (page 9) for more
specific information regarding the various trims that can be replaced.
Outside lever is unlocked through access control credentials or mechanical key override
Accepts various rim cylinders (cylinder not included). For a partial list of cylinders by others, see table on
page 9.
Can be used with all P1 & P2 features
On-board memory
RX switch required (not included)*
*Von Duprin
RX Switch Retrofit Kit (part number 050251-00) available through an authorized
®
Von Duprin distributor.

Electronic Specifications

4
P1
2,400 users per lock; 10,000 event audit trail
Multiple time zone and holiday access scheduling
First-In unlock configuration, either by time or by
user (selectable)
Centralized lock management
Real time door status monitoring
Lockdown capable
P2
2,400 users per lock; 10,000 event audit trail
Multiple time zone and holiday access scheduling
First-in unlock configuration, either by time or by
user (selectable)
Wireless (WiFi 802.11 b/g), battery-operated
Input Power: DC 9V, 1.5A (6 AA alkaline batteries
or optional hard-powered)
Uses existing Magstripe keycards (track 2)
1-800-810-WIRE • www.sargentlock.com • A8112C
EK Exit Device Retrofit Kit for Passport 1000
• HID
multiCLASS SE
®
support for the following credentials:
2.4 GHz credential compatibility:
13.56 MHz credential compatibility:
iCLASS
iCLASS SE
iCLASS Seos
SIO on MIFARE
SIO on MIFARE
MIFARE
DESfire
NFC-enabled mobile phones
125 kHz credential compatibilty:
HID Prox
Magnetic Stripe
4
technology offers
®
Secure Identity Object
(SIO) on
Mobile IDs (Bluetooth Smart)
®
(SIO-enabled)
®
®
Classic
®
DESfire
EV1
®
®
Classic
®
EV1
®
®
®

Advertisement

loading

This manual is also suitable for:

Passport 1000