Download Print this page

Table Of Contents; Warning - Sargent EK Exit Device Retrofit Kit Installation Instructions Manual

Series p1/p2

Advertisement

Warning ...................................................................................3
1
General Description .................................................................4
2
Hardware Specifications .........................................................4
3
Electronic Specifications .........................................................4
4
Installation Instructions ..........................................................5
5
Operational Check .................................................................23
6

Warning

1
FCC
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-
ence in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in ac-
cordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Industry Canada:
Statement: The term "IC:" before the radio certification number only signifies that Industry Canada
technical specifications were met.
This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regula-
tions. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Cet appareillage numérique de la classe B répond à toutes les exigences de l'interférence canadienne
causant des règlements d'équipement. L'opération est sujette aux deux conditions suivantes: (1) ce
dispositif peut ne pas causer l'interférence nocive, et (2) ce dispositif doit accepter n'importe quelle
interférence reçue, y compris l'interférence qui peut causer l'opération peu désirée.
!
To comply with "Fire Listed" doors, the batteries must be replaced with alkaline batteries only.
Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening,
and SARGENT
situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-
rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure
compliance with all applicable codes and ratings.
Observe precautions for handling electrostatic sensitive devices.
1-800-810-WIRE • www.sargentlock.com • A8112C

Table of Contents

Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
makes no representations or warranties concerning what such impact may be in any specific
®
3

Advertisement

loading

This manual is also suitable for:

Passport 1000