Change Of The Effective Image; Area - Konica Minolta CS-7 Operation Manual

Direct digitizer
Hide thumbs Also See for CS-7:
Table of Contents

Advertisement

6 .7 Functions of the viewer screen
6 .7 .3
Change of the effective
image area
Although this device automatically recognizes the ef-
fective image area and displays it within the image
area, the effective image area can be adjusted manu-
ally as necessary .
1
Press [Cropping] .
• The viewer screen is displayed .
2
Change the effective image area.
• When an image is pressed in any location, the
effective image area moves with the pressed
part as the center .
Icon
Switch between [ON] and [OFF]
of the image processing tempo-
rarily .
Press any 2 points to specify
the square with a diagonal line
that connects the 2 points as
the size of the effective image

area .

Adjust the width of the effective
image area . The width chang-
es every time you press these
buttons .
Adjust the height of the effec-
tive image area . The height
changes every time you press
these buttons .
Functions
178
Icon
To use a fixed size effective
image area, set this option to
[ON].
Resets operations performed
in the tab .
3
Press [Return] after change.
• Returns to the exposure screen.
IMPORTANT
•••••••••••••••••••••••••••••••••• • ••
• If image recognition fails and an inappropriate effec-
tive image area is set during automatic reading, the
image may become white or black all over . When this
happens, temporarily set the image processing to
[OFF] and set the appropriate effective image area.
• Depending on the image information status, auto-
matic reading may not be carried out properly, and
part of the image may be missing . In this case, please
change the effective image area manually.
•••••••••••••••••••••••••••••••••••••••••••••••••• • ••
•••••••••••••••••••••••••••••••••• • ••
HINT
• Depending on the printer, the output may be smaller
than the effective image area. When this type of print-
er is used, specify the effective image area in advance
assuming a smaller output .
• The effective image area can be changed by directly
dragging the square mark on the frame border of the
effective image area or its perimeter.
•••••••••••••••••••••••••••••••••••••••••••••••••• • ••
Functions

Advertisement

Table of Contents
loading

Table of Contents