Table of Contents
Advertisement
7.2 Exposure with AeroDR Portable RF Unit2
7 .2 .7
Change of the IP ad-
dress of the connected
institution network
Follow the steps below to obtain information from RIS
in advance, or to switch the IP address when connect-
ing to the institution network and outputting data to RIS
after you return to the institution .
The procedure for switching from [Area1] to [Area2] is
described below as an example.
1
Press [
] on the list screen .
• The area selection button is displayed .
2
Press the area selection button .
• The area selection screen is displayed .
3
Press the button corresponding to the de-
sired area name .
• Press [Cancel] to return to the previous screen.
• The area is switched, and the display returns to
the list screen .
IMPORTANT
• When there is data which has not yet been transmit-
ted, a confirmation screen appears.
→ Press [OK] to execute the change in IP address.
→Press [Cancel] to close the area selection screen
and return to the list screen . After transmitting the
data, please change the IP address .
• When selecting areas using an external wired LAN
adapter, make sure the external wired LAN adapter is
attached before pressing the area selection button .
•••••••••••••••••••••••••••••••••••••••••••••••••• • ••
214
•••••••••••••••••••••••••••••••••• • ••
Advertisement
Table of Contents
