Table of Contents
Advertisement
••••• ••••••••••••••••••••••••• •••••••
HINT
• It is also possible to register multiple exposure body
parts in 1 Exam. Tag.
•• • •• •• • •• •• •••••••••••••••••••••••••••••••••••••••••
2
Press [Perform] .
• The exposure screen is displayed.
3
Perform exposure .
• Configure the X-ray device settings and check
the exposure setting before making an expo-
sure .
Press the exposure switch
• Exposed image is displayed.
• Perform the subsequent exposures with same
procedure .
7.5 Manual stitching exposure
7 .5 .3
Image combination
Combine the exposed images. The following proce-
dure describes an example of combining 3 images.
IMPORTANT
• ••• •• •• •• ••• •• •• •• •• ••• •• •• •• ••• • • • •
• Adjust the combination position by using the markers
as supplementary standards in addition to body parts
of the subject .
It is also recommended that you arrange the measure
in the combined image part during exposure to sim-
plify the confirmation of the combined parts.
• In stitching exposure, when plates overlap and are ar-
ranged so that there is no image loss in each plate's
boundaries, there might be a slight gap in the marker
position because of a minute difference in magnifica-
tion. After taking this into account, confirm the combi-
nation position through the marker .
•• •• •• •• ••• •• •• •• ••• •• •• •• ••• •• •• •• ••• •• •• •• ••• •• • • • •
1
Select the images to be combined .
• Select the images to be combined from the or-
der list and press [
• The selected images are displayed in the com-
bined image display area .
• If you pressed [
associated images (second and third) .
HINT
• ••• •• •• •• ••• •• •• •• •• ••• •• •• •• ••• • • • •
• [
] and [
Exam. Tag for stitching exposure is selected.
•• •• •• •• ••• •• •• •• ••• •• •• •• ••• •• •• •• ••• •• •• •• ••• •• • • • •
247
] or [
].
], continuously select the
] can be pressed only when the
Advertisement
Table of Contents
