Replacing An Image - Konica Minolta CS-7 Operation Manual

6.4 Functions of the exposure screen
6 .4 .7

Replacing an image

You can replace an exposed image (order) with other
images .
z Screen structure
This is the screen used for selecting the image to be
replaced .
(1)
(2)
Number Name
(1) First page button
(2) Previous button
Image to be
(3)
replaced
(4) Next button
(5) Last page button
(6) Cancel button
z Image exchange procedure
IMPORTANT •••••••••••••••••••••••••••••• •••••••
• An image cannot be replaced while the following op-
erations are taking place .
– Exposure
– Acquisition of an image from the reading device
• Replacement with the following images is not available .
– The image of an order that was not successfully
acquired from the reading device
– An image of the order that is waiting for image re-
transmission
– Images created by stitching exposure
– A rejected image
– A copied image
– An image exposed as a mammogram and an image
exposed as anything other than a mammogram (an
image exposed as mammogram can be used to re-
place another image exposed as a mammogram)
– An image exposed with a CR cassette and an im-
age exposed with an DR Detector.
• •• • • •• • • •• • •••••••••••••••••••••••••••••••••••••••••
(3)
(4)
(5)
(6)
Functions
Moves the display to the first
list of images to be replaced .
Moves the display to the
previous list of images to be
replaced .
Displays the order image to
be replaced .
Moves the display to the next
list of images to be replaced .
Moves the display to the final
list of images to be replaced .
Closes the screen .
1
Select the replacing image from the order
list .
2
Press [
• The image exchange screen is displayed.
IMPORTANT
• Select a replacing image from the exposed order im-
ages .
•••••••••••••••••••••••••••••••••••••••••••••••••• • ••
HINT
• You can display [
vice tool. When [
Konica Minolta technical representatives .
•••••••••••••••••••••••••••••••••••••••••••••••••• • ••
3
Select an order image to be replaced .
• A confirmation screen is displayed.
140
] .
•••••••••••••••••••••••••••••••••• • ••
•••••••••••••••••••••••••••••••••• • ••
] by setting it using the ser-
] is not displayed, contact