Table of Contents
Advertisement
9 .1 .5
Reacquisition of images
from the REGIUS
Reacquire the images when images cannot be re-
ceived from the REGIUS after the exposure due to
reasons such as communication errors, etc .
1
When the message "Image reception is
not completed . Check the network ." ap-
pears, press [OK] .
2
Please check the connection status with
REGIUS.
• A confirmation screen will be displayed . Press
[OK].
• The "Receiving the retransmitted images"
screen is displayed .
• It continues until the images are received suc-
cessfully .
• Images are reacquired and displayed .
HINT
••••• ••••••••••••••••••••••••• •••••••
• If you cancel via the "Receiving the retransmitted imag-
es" screen, a confirmation screen which says, "Are you
sure you want to cancel image reception? Restart the
reader in case of reception canceled ." will be displayed .
→ Press [OK] to cancel retransmission. The REGIUS
needs to be restarted .
→ Press [Cancel] to return to the "Receiving the retrans-
mitted images" screen, and to continue receiving .
•• • •• •• • •• •• •••••••••••••••••••••••••••••••••••••••••
9.1 Various problems and countermeasures
9 .1 .6
Communications error
during image reception
When a fault occurs in network communications while
receiving images, operation sometimes becomes im-
possible .
When operation cannot be continued after about 5
minutes have elapsed, shut down this device and re-
start .
381
Advertisement
Table of Contents
