Table of Contents
Advertisement
Displayed message
Study retreival from console [Other device name] got failed for
the study [PATIENT_ID,PATIENT_NAME]. Please check the
study status or Study sharing status .
Study without captured images cannot be completed .
Study without exam tags exists. Cannot perform the study.
System cannot be switched by current user. [ERRORS]
System hasn't completed [STATUS] within a time frame yet.
Are you want to proceed?
System hasn't completed [STATUS] within a time frame yet.
System complete the process .
The contents changed when the tab was changed without sav-
ing are lost .
Are you sure?
The corresponding patient is not present in the DB
The wireless use will be set OFF . Is it OK?
The wireless use will be set ON . Is it OK?
There are images unreceived to the AeroDR .
Do not turn off the power of AeroDR.
Return AeroDR detector to previous connection state(Wired/
Wireless) . In the case of wireless connection, the electric wave
state has deteriorated .
Please check an electric wave state by the AeroDR icon at the
upper right of a screen, and wait until connection returns .
There are no captured images . Are you sure you want to
change status to not started?
There is an exposed image in the study, do you want to edit the
study?
There is no corresponding study, patient info .
There is no corresponding study, patient .
There is no corresponding study .
There is no Exam. Tag license.
There is no images for auto assignment .
8.2 Dialog boxes/balloons and countermeasures
Problems/countermeasures
The target study does not satisfy sharing conditions . Check the
target study status . Target studies in the following statuses can-
not be moved .
• The same study exists in the destination and is in progress
• The same study exists in the destination and is complete
• The same study exists in the destination and is scheduled for
moving
• The study in the source is in progress
• The study in the source is scheduled for moving to another
terminal
Cannot be terminated because studies with no exposed images
are included .
Press [OK] to close the screen.
Displayed when studies with unspecified Exam. Tags are in-
cluded in the studies selected with the multi-study . Select only
studies with specified exposure body parts, and then begin the
study .
Restart this device .
Cancel and restart the device .
Press [OK] to force stop the process.
Displayed when switching tabs without saving setting informa-
tion .
This is displayed when patient information could not be found in
the patient information search .
Displayed when changing wireless from enabled to disabled .
Press [OK] to continue.
Displayed when changing wireless from disabled to enabled .
Press [OK] to continue.
Displayed when unreceived images remain in the DR Detector .
Check the network equipment and communication cable con-
nection status .
Press [OK], and wait until image re-acquisition is complete.
This is displayed when suspending a study without capturing
any image .
This is displayed when modifying the patient information of the
completed study .
Displayed when the queried patient or study cannot be found .
Press [OK] to close the screen.
This is displayed when corresponding study or patient informa-
tion was not found as a result of searching the higher system for
study or patient information .
This is displayed when a searched study was not found .
Enter new search conditions and search again .
Contact Konica Minolta technical representatives .
This is displayed when there are no Exam. Tags set for auto
assignment in the print composer .
371
Continued on the next page
Advertisement
Table of Contents
