(Basic Connection); Exposure Procedure Flow - Konica Minolta CS-7 Operation Manual

5 .2 Exposure procedure with DR Detector (Basic connection)
5 .2 .1

Exposure procedure flow

The following describes the basic flow of exposure procedure using the DR Detector. See each item for detailed pro-
cedures .
Number
(1) Perform a new patient registration in the patient registration screen .
(2) Select the examination target in the list screen.
(3) Set the exposure body part and exposure condition.
(4) Press the exposure switch.
(5) Adjust the exposed images after exposure. Change the S value/G value, move the ROI area, etc.
When all exposures are finished, the examination is completed. Image is simultaneously and automatically output upon
(6)
examination completion. (depending on the settings)
5 .2 .2 New registration of patient information ... (1)
5.2.3 Selection of examination ...... (2)
5 .2 .4 Manual body part selection ............ (3)
5.2.5 Exposure procedure ..................... (4)
5 .2 .6 Image adjustment on the exposure screen ... (5)
5.2.7 Examination completion and output ... (6)
Task
87