Bypass Tray - Sharp BP-10C20 Quick Start Manual

BEFORE USING THE MACHINE

Bypass tray

1
Do not place heavy objects on the bypass tray or press down on the tray.
2
3
4
20
Open the bypass tray.
If you are loading paper of length greater than 250 mm
(9-27/32"), open the extension tray.
Push the centre of the pressure plate
down until it locks into place.
Load the paper with the print side
facing down.
Insert the paper along the bypass tray guides all the way into the
bypass tray until it stops slowly. Inserting the paper with excessive
force may cause the leading edge to fold back. Inserting the paper
too loosely may cause skewed feeding or misfeeds.
The paper must not exceed the maximum number of sheets
and must not be higher than the indicator line.
Set the bypass tray guides correctly to
the width of the paper.
Adjust the bypass tray guides so that they slightly contact
the loaded paper.