RayTek GP Series Operating Instructions Manual page 9

Safety Instructions
Operating Instructions
The following symbols are used to highlight essential safety
information in the operation instructions:
Helpful information regarding the optimal use of the
instrument.
Warnings concerning operation to avoid instrument
damage and personal injury.
The instrument can be equipped with a Class 2 laser.
Class 2 lasers shine only within the visible spectrum at an
intensity of 1 mW. Looking directly into the laser beam
can produce a slight, temporary blinding effect, but does
not result in physical injury or damage to the eyes, even
when the beam is magnified by optical aids. At any rate,
closing the eye lids is encouraged when eye contact is
made with the laser beam. Pay attention to possible
reflections of the laser beam. The laser functions only to
locate and mark surface measurement targets. Do not aim
the laser at people or animals.
2
Rev. F 10/2011
GP Series