Hardware aNd software iNstallatioN
Before installing this product, see Safety and Regulatory Compliance
Information on the product CD for important information.
All units must be installed by a suitably trained professional installation
technician or by a qualified installation service.
To ensure proper grounding, use the hole at the bottom point on the back
of each unit and the provided grounding screws to attach a ground wire of
at least 10 AWG stranded to each unit. Use proper wire grounding tech-
niques in accordance with local electric codes.
Notes:
▪
Be sure to read the Release Notes file on the product CD as it contains
software version and driver information that may not have been available
when this document was produced.
▪
Equipment is to be used with, and powered by, the power injector provided
or by a power injector that meets these requirements:
–
UL-Listed/ITE (NWGQ)
–
Limited Power Source Output per UL/IEC 60950
–
CE-marked
–
Approved for Power-over-Ethernet
–
Rated output, 48 Vdc/0.42 A
–
Pinout follows 802.3af standard for mid-span devices
Page 8
IMPORTANT!
IMPORTANT!
WARNING!
Copyright © 2007 Proxim Wireless