Supplemental Information - JLG 340AJ Operation And Safety Manual

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
4. Wheel nuts should be torqued before first road use and after
each wheel removal. Check and torque every 3 months or
150 hours of operation.
6-20
6.5

SUPPLEMENTAL INFORMATION

The following information is provided in accordance with the
requirements of the European Machinery Directive 2006/42/EC
and is only applicable to CE machines.
For electric powered machines, the equivalent continuous A-
Weighted sound pressure level at the work platform is less than
70dB(A)
For combustion engine powered machines, guaranteed Sound
Power Level (LWA) per European Directive 2000/14/EC (Noise
Emission in the Environment by Equipment for Use Outdoors)
based on test methods in accordance with Annex III, Part B,
Method 1 and 0 of the directive, is 104 dB.
The vibration total value to which the hand-arm system is sub-
jected does not exceed 2,5 m/s
value of weighted acceleration to which the whole body is sub-
jected does not exceed 0,5 m/s
– JLG Lift –
2
. The highest root mean square
2
.
3121258