Installing Front Fender; Removing The Shock Absorber - Husqvarna FE 350 EU 2020 Owner's Manual

12.15

Installing front fender

12.16

Removing the shock absorber

SERVICE WORK ON THE CHASSIS 12
Main work
–
Position front fender. Mount and tighten screws
Guideline
Remaining screws,
chassis
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
H03691-10
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Remove the cable ties.
–
Remove screws
–
Detach the frame protector in area
S03555-10
–
Remove screw
–
Remove fitting
Info
Raise the link fork slightly to be able to remove the
screws more easily.
H03693-10
M6 10 Nm (7.4 lbf ft)
2
.
M6 10 Nm (7.4 lbf ft)
p. 118)
p. 54)
1
with the washers.
A
and take it off.
2
.
3
.
1
.
p. 115)
63