Qualifications Of Operating Personnel - Bosch Rexroth EFC 3600 Operating Instructions Manual

DOK-RCON03-EFC-3600***-IT01-EN-P
Rexroth Frequency Converter EFC 3600
● The machine and installation manufacturer must
– make sure that the delivered components are suited for each individual applica‐
tion and check the information given in this document with regard to the use of
the components.
– make sure that this application complies with the applicable safety regulations
and standards and carry out required measures, modifications and complements.
● Start-up of the delivered components is only permitted after the machine or installa‐
tion in which they are installed complies with the national standards, safety instruc‐
tions and application standards.
● Operation is only permitted if the national EMC standards for the application are met.
● The machine or installation manufacturer is responsible for compliance with the limit‐
ing values as prescribed in national standards.
Technical data, connections and operational conditions are specified in the
product documentation and must be followed at all times.
2.2

Qualifications of Operating Personnel

● Only assign trained and qualified persons to work with electrical installations.
● Only persons who are trained and qualified for the use and operation of the device
may work on this device or within its proximity. They need to have adequate knowl‐
edge in product assembly, mounting and operation. They are capable of understand‐
ing all warning messages marked in the instructions and respective prevention
measures.
● Furthermore, they must be trained, instructed and qualified to switch electrical cir‐
cuits and devices on and off in accordance with technical safety regulations and to
mark them according to the requirements of safe work practices. They must have
adequate safety equipment and be trained in first aid.
2.3 Declarations on Property Loss and Product Damage
● Safety-relevant are all such applications which can cause danger to persons and
material damage.
● Only use safety-relevant applications that are clearly and explicitly approved in the
Operating Instructions. If this is not the case, they are excluded.
● Read the operating, maintenance and safety instructions in your language before
starting up the machine. If you find that you cannot completely understand the docu‐
mentation for your product, please ask your supplier to clarify.
Safety Instructions for Electric Drives and Controls
Bosch Rexroth AG
11/235