Bosch Rexroth EFC 3600 Operating Instructions Manual page 56

Bosch Rexroth AG
Parameter Settings
● 1: Standard parameters. In this mode, parameters in group b and S (S0, S2 and S3)
are visible.
● 2: Extended parameters. In this mode, parameters in group b, S and E (E0, E1, E2,
E3 and E4) are visible.
● 3: Advanced parameters. In this mode, parameters in group b, S, E and H (H0) are
visible.
● 4: Start-up mode. The parameters in this mode are not additional parameters, but
only quick links to the respective parameters. See the table below for details:
Function code
[b0.21]
[b1.00]
[b1.02]
[b1.04]
[b1.05]
[b1.06]
[b1.07]
[b1.10]
[b1.20]
[b1.21]
[b1.22]
[b1.30]
[b1.40]
[S0.00]
[S2.00]
[S2.01]
[S2.02]
[S2.03]
[S2.04]
Fig.8-1: Parameters in start-up mode
● Monitoring parameter group is always visible.
● User password protection will not affect the modification of [b0.02].
54/235
Carrier frequency
First frequency setting source
First RUN command source
Digital set frequency
Max. frequency
Upper frequency
Lowest frequency
Direction control
Acceleration time 1
Deceleration time 1
Acceleration / deceleration curve mode
Starting mode
Stopping mode
V/F curve mode
Rated motor frequency
Rated motor rotation speed
Rated motor power
Rated motor voltage
Rated motor current
DOK-RCON03-EFC-3600***-IT01-EN-P
Rexroth Frequency Converter EFC 3600
Name