Chapter 5: Installers Guide - Tele Radio Tiger T2 Installation Instructions Manual

CHAPTER 5: INSTALLERS GUIDE

CREATE PIN CODES
NOTE! You can store up to 10 PIN codes in the transmitter.
NOTE! '0000' is not a valid PIN code.
1. Make sure that the stop button is pressed.
2. Pull out the stop button.
The top LED lights (green when the battery capacity is good, red when the battery capacity is poor).
3. Press the right start button. Keep pressed.
4. Press the stop button.
5. Release the right start button.
The top LED flashes (green when the battery capacity is good, red when the battery capacity is poor)
when in menu mode.
6. Go to [Enter PIN].
7. Select what position in the list that you want to store the new PIN code in by pressing the left start
button.
8. Enter the new PIN code (4 digits) by pressing the buttons 1-4:
PRESS BUTTON
1
2
3
4
9. Confirm by pressing the left start button.
ERASE PIN CODE
1. Make sure that the stop button is pressed.
2. Pull out the stop button.The LEDs light (green when the battery capacity is good, red when the
battery capacity is poor).
3. Press the right start button. Keep pressed.
4. Press the stop button.
5. Release the right start button.
The LEDs light (green when the battery capacity is good, red when the battery capacity is poor) when in
menu mode.
6. Go to [Erase PIN].
Chapter 5: INSTALLERS GUIDE
TO
step up
step down
step right
step left
- 19 -