Chapter 4: Installers Guide; Navigate In Menu Mode; Enable Pin Codes - Tele Radio TG-T14-4 Installation Instructions Manual

CHAPTER 4: INSTALLERS GUIDE

NAVIGATE IN MENU MODE
To navigate when in menu mode:
Press...
Button 1
Button 2
Button 3
Button 4
The left start button
The right start button
ENABLE PIN CODES
1. Make sure that the stop button is pressed.
2. Twist and pull out the stop button.
The top LED lights (green when the battery capacity is good, red when the battery capacity is poor).
3. Press the right start button. Keep pressed.
4. Press the stop button.
5. Release the right start button.
The top LED flashes (green when the battery capacity is good, red when the battery capacity is poor)
when in menu mode.
6. Go to [Startup Protect.].
7. Select one or more start-up protection choices by pressing the left start button.
Select...
[Stored PIN]
[Any PIN]
[Allow skip]
8. Confirm by pressing the left start button.
Chapter 4: INSTALLERS GUIDE
to...
Step down
Step up
Step left/ go back
Step right
Select/ confirm
Exit
to...
Only accept PIN codes registered in the trans-
mitter
Accept any PIN code
Allow to skip any start-up
authorization
- 30 -