Chapter 3: Product - Tele Radio Tiger T2 Installation Instructions Manual

CHAPTER 3: PRODUCT PAGES
RECEIVER R00004-05
WARNING! The receiver must NOT be opened by any other than a qualified installer. Make sure to
turn the electricity off before opening the receiver.
IMPORTANT! Tele Radio remote controls are often built into wider applications. We recommend
that the system is provided with a wired emergency stop where necessary.
Base board:
1. LED representing stop relays 1+2 (red)
2. Stop relays 1+2
3. Obligatory fuse 2A (slow)
4. Terminal block for input power
5. Function relays 1-7
6. Relay LEDs 1-7 (red)
7. Function LEDs 5-7 (5= red, 6= yellow, 7=
green)
Chapter 3: PRODUCT PAGES
8. Antenna connector
9. Function LEDs 1-4 (1= red, 2= yellow, 3=
green, 4= orange)
10. Function button (Cancel)
11. Terminal block for mixed I/O
12. Select button (OK)
13. Programming connector
14. Power LED (yellow)
- 6 -