List Of Memory Switch Settings - Brother RH-9820 Service Manual

2. FUNCTION SETTINGS

2-4. List of memory switch settings

Memory switches which have a "*" in the default value column (050, 752, 850, 851, 852 and 853) are ignored when memory
switch initialization is carried out.
The settings for these memory switches are only changed when the ENTER key is pressed in memory switch mode.
For operator
Setting
No.
range
Switching between 1-pedal and 2-pedal operation
* Displayed when using a hand start switch or 2-pedal foot switch
001 1
2
F key assignment
OFF
300
1 - 40
Parameter checking column (1) in automatic mode
1
301
2
Parameter checking column (2) in automatic mode
3
302
4
Display screen contrast
303
0 - 30
Number of eyelet buttonholes when the fly indexer is used
* This is displayed when the fly indexer is enabled.
500
2 - 9
Fly setting position when the fly indexer is used
* This is displayed when the fly indexer is enabled.
501
1
2
5
When the start switch is pressed, the work clamp is lowered and the sewing machine
starts.
When the start switch is pressed, the work clamp is lowered.
After that, the sewing machine starts operating when the start switch is pressed.
The Help screen is displayed while the F key is being pressed.
Operates as a 7th shortcut key.
* The numerals indicate the parameter numbers.
Shows the sewing length.
Shows the sewing pitch.
Shows the sewing speed.
Shows the number of stitches.
The higher the value, the greater the contrast.
The number of eyelet buttonholes can be set.
* If the number of buttonholes is 5 or more, a cloth feed bar (sold separately) is required.
The material (fly) setting position is always at the left edge.
After sewing is finished, the cloth feed bar returns to the left edge.
The material (fly) setting position repeatedly alternates between the left and right edges.
Setting items
RH-9820
Default
value
2
OFF
1
(1)
0222B
(2)
3
0222B
15
2
2