6. ASSEMBLY
6-7. Y feed mechanism
* Refer to the detailed descriptions on pages 70 to 72 for details on A to F in the illustration.
* Apply the grease specified by Brother (MOLYKOTE LONGTERM W2 manufactured by Dow Corning
Corporation) in the places indicated by
NOTE:
After carrying out this procedure, be sure to adjust the Y home position while referring to "7-35. Adjusting
the needle up signal home position for the upper shaft and upper shaft motor".
F
E
Install the timing belt.
69
Assemble so that the
flanges are on the
inside.
F
C
B
.
A
D
Install so that the motor
connectors are facing as
indicated by the arrow.
RH-9820
0839B