Brother RH-9820 Service Manual page 76

6. ASSEMBLY
D
Slide block guide D installation
Face plate side
E
Slide block guide F installation
Face plate side
67
1) Provisionally tighten the four socket bolts (10)
2) While pushing the slide block guide D (9) gently
3) Fully tighten the four socket bolts (10).
Right side
1) Provisionally tighten the three socket bolts (37)
2) While pushing the slide block guide F (36)
3) Fully tighten the three socket bolts (37).
Right side
RH-9820
so that the slide block guide D (9) can still
move.
from the face plate side toward the arm
installation surface, tighten the fifth socket bolts
(10) (f) from the side of the arm.
so that the slide block guide F (36) can still
move.
gently from the face plate side toward the arm
installation surface, tighten the fourth socket
bolts (37) (g) from the side of the arm.
0836B
0837B