Brother RH-9820 Service Manual page 22

2. FUNCTION SETTINGS
Specifications and destination settings
Setting
No.
range
Machine head specifications
* This is not overwritten by CF card data.
NOTE: Always be sure to set this to match the machine head specifications.
850
-00
-01
-02
Work clamp size
* This is only displayed for -02 specifications.
* This is not overwritten by CF card data.
NOTE: Always be sure to set this to match the work clamp specifications.
L1422
851 L1826
L2230
L2634
L3442
Circular stitch work clamp
* This is only displayed for -00 and -01 specifications.
* This is not overwritten by CF card data.
NOTE: Always be sure to set this to match the work clamp specifications.
852
OFF
ON
Language
* This is not overwritten by CF card data.
English
Japanese
Chinese
Spanish
German
853
French
Italian
Turkish
Portuguese
Indonesian
Vietnamese (Ver. 1.1.00 or later)
Russian (Ver. 1.1.00 or later)
Sewing fold point correction value (mm)
OFF
854
6
13
Sets to -00 specifications.
Sets to -01 specifications.
Sets to -02 specifications.
Sets to L1422 specifications.
The setting range for the sewing length will be 14 - 22 mm.
Sets to L1826 specifications.
The setting range for the sewing length will be 18 - 26 mm.
Sets to L2230 specifications.
The setting range for the sewing length will be 22 - 30 mm.
Sets to L2634 specifications.
The setting range for the sewing length will be 26 - 34 mm.
Sets to L3442 specifications.
The setting range for the sewing length will be 34 - 42 mm.
When using a normal (not circular stitch) work clamp
When using a circular stitch work clamp
Parameters only for circular stitches will be displayed when programming.
The language can be selected from 12 available languages.
Normal
Straight buttonholes can be formed with the eyelet knife still installed.
At this time, the sewing fold point will be 6 mm forward of the normal point.
In addition, the maximum sewing length for straight buttonholes will be 6 mm smaller
than normal.
* This is enabled when sewing straight buttonholes.
Setting items
RH-9820
Default
value
*
*
*
*
OFF