Brother RH-9820 Service Manual page 132

6. ASSEMBLY
A
Spring hook installation
(Top)
B
Install the pin (14) so that it projects by the
distance shown in the illustration.
123
Should be flush
1015B
1) Provisionally tighten the nut (3) about halfway
onto the spring hook (4).
2) Install the spring hook (4) to the cloth work
clamp plate (a), and then tighten the nut (3)
until the end of the spring hook (4) is flush with
the top surface of the cloth work clamp plate
(a).
* Install the spring hook (4) so that the hole
(b) is facing in the direction shown in the
illustration.
C
Install the spring hook (15) so that it faces in
the direction shown in the illustration.
RH-9820
(Bottom)
1014B
1016B