Configuring Wireless # Settings - Ruckus Wireless ZoneFlex 7782 Installation Manual

Preparing the 7782 Access Point at the Depot and Shipping to the Field
Configuring the AP for Management by FlexMaster or for Standalone Operation

Configuring Wireless # Settings

The settings on at least one Wireless # tab are required to enable wireless devices to
associate with the AP.
1. Click one of the Wireless # tabs. The selected Wireless # page appears
Figure 15.
2. In Wireless Availability, click Enabled.
3. In Broadcast SSID, click Enabled.
4. Clear the SSID box, and then type a unique and descriptive name that you want to call
this wireless network.
For example, you can type Ruckus Wireless AP. This SSID is the name that helps
users identify this wireless network in their wireless network connection application.
NOTE: You may also configure other wireless settings on this and other Wireless # tabs
(in addition to the settings described above), although it is not necessary for completing
the AP installation.
5. Click Update Settings. You have completed configuring the basic wireless settings of
the AP.
26
The Configuration > Radio 2.4 > Wireless 1 tab
(Figure 15).