Disconnecting The Ap From The Power Source And Administrative Computer - Ruckus Wireless ZoneFlex 7781CM Installation Manual

Preparing the 7781CM at the Depot and Shipping to the Field
Verifying AP Operation
Disconnecting the AP from the Power Source and
Administrative Computer
1. Disconnect the AP from the power source.
2. Verify that all LEDs are off.
3. Disconnect the Ethernet cable that runs to the AP's RJ-45 Ethernet Port from your
administrative computer.
4. Disconnect the Ethernet cable from the administrative computer's Ethernet port.
Continue with
38
Restoring the Administrative Computer's Network Settings.